This page deals principally with setting up, operation and maintenance.
* Remove Towel Cabinet from transport packaging
* Un-clip mains wire from base
* Unwrap inner baskets
* Plug in the machine and switch on. Two neon indicators will light, one being the on/off switch
* Upon reaching its working temperature the heating will cut off automatically and the neon next to
the switch will go out. When the machine temperature drops to a preset level it will cut in again, thereby maintaning
a working temperature.
*********************************************************************
* To start using your Towel Cabinet simply load up the inner basket with towels and await warming.
For best results switch on and load your Towel Cabinet one hour before towels are required (especially if you keep towels
in freezer), thereafter twenty minutes is sufficient
* Your inner basket has two levels, allowing you to use one level whilst the other is warming new towels
* Please switch off your Towel Heater overnight and leave doors open
* Empty the drip tray at regular intervals
* Clean the cabinet inside and out with a damp cloth only
* Should you Towel Cabinet fail to function, check the fuses located in the plug
and on the rear of the machine
* For your convenience a spare fuse is supplied with your machine, attached to the base
* Your Towel Cabinet will need no other maintenance
* Careful use of your machine will extend its working life
* DO NOT TAMPER WITH THE INSIDE OF THE MACHINE AS THIS WILL INVALIDATE THE WARRANTY.
Manufactured by JP Design & Manufacturing Ltd tel 01202 891795
CE Approved
